Hello all,
FORSALE: In-progress RV-12iS kit. At the time, the 12 was fine, but now I need a 4-seat cruiser. I am an LSRM and former UH-60 Repairer while I was in the Army.
I have all the parts kits in hand, not including the engine and avionics. Kits designed for the Rotax 912iS Engine model.
If you are interested, I can send you more pictures. I live in Bristol, TN.
Builder’s Log
https://eaabuilderslog.org/?blproject&proj=7qIlx7uZu
Thank you,
Jon C
FORSALE: In-progress RV-12iS kit. At the time, the 12 was fine, but now I need a 4-seat cruiser. I am an LSRM and former UH-60 Repairer while I was in the Army.
I have all the parts kits in hand, not including the engine and avionics. Kits designed for the Rotax 912iS Engine model.
- 2021 Empennage/Tail Kit with Stabilator Fairing Kit - All major components completed but not put together. E.g. cone, vertical stab, stabilator, rudder, and anti-servo tabs separate.
- 2022 Wing Kit with dual lighting kit - Completed except for wing tip position lights. Included is the wing jig if you want.
- 2022 Fuselage Kit - Fuel tank completed, but needs final pressure testing. Started on the aft bulkhead.
- 2023 Finish Kit - Included Wheel Fairing Kit, RV-12 Glareshield, Canopy Trim Kit, Sidewalls, Carpet, and Baggage Trim. The carpet, belts, and seats are the Grey/Blue color option.
- Includes hardware also.
- None of the kits have parts needing replacement for laser cut parts.
- I have a $10k deposit down on the powerplant/prop from pre-chapter 11. I'd like to transfer that if I can. Would be about 6k in savings there from ordering today.
If you are interested, I can send you more pictures. I live in Bristol, TN.
Builder’s Log
https://eaabuilderslog.org/?blproject&proj=7qIlx7uZu
Thank you,
Jon C
