Followed the drilling instructions to the letter yet still managed to misalign. Ended up with about 3/16" difference in deflection of the counterweight arm. (left one flush, right one 3/16 off.) Welded the hole, re-drilled and now about .100 out.
question is, can I Iive with the slight misalignment and move on or weld again and redrill? Maybe use a round file on one side of the hole in the horn and rely on the clamping of the washers and nut?
Very frustrating.......
Carl Raichle
question is, can I Iive with the slight misalignment and move on or weld again and redrill? Maybe use a round file on one side of the hole in the horn and rely on the clamping of the washers and nut?
Very frustrating.......
Carl Raichle