Art_N412SB
Member
Hello All,
I have been flying the RV-12 for about a month now and am really enjoying it. I have a Garmin Virb Ultra 30 action cam that I use to record my flights. I plug the Cam into the aircraft intercom through the usual means. A headset patch cord.
When I listen to the video clips I get a lot of alternator noise, especially when I load up the system with strobes and flashing landing light. So far, I have been dealing with the issue by using an Equalizer to filter out most of the noise during the editing of my video clips. I am not very good at that and the results are kind of poor.
The odd thing is that while flying I do not hear the noise in my headsets. I am using noise canceling headsets.
Here is my question. Have any of you out there experienced the same problem? What were your solutions?
Here is my latest video from my YouTube channel. Jump to the end where I am approaching KTIW with lights and strobes. You will see what I am dealing with. https://youtu.be/upiV3Rh2f2o
Thanks a bunch,
Art
I have been flying the RV-12 for about a month now and am really enjoying it. I have a Garmin Virb Ultra 30 action cam that I use to record my flights. I plug the Cam into the aircraft intercom through the usual means. A headset patch cord.
When I listen to the video clips I get a lot of alternator noise, especially when I load up the system with strobes and flashing landing light. So far, I have been dealing with the issue by using an Equalizer to filter out most of the noise during the editing of my video clips. I am not very good at that and the results are kind of poor.
The odd thing is that while flying I do not hear the noise in my headsets. I am using noise canceling headsets.
Here is my question. Have any of you out there experienced the same problem? What were your solutions?
Here is my latest video from my YouTube channel. Jump to the end where I am approaching KTIW with lights and strobes. You will see what I am dealing with. https://youtu.be/upiV3Rh2f2o
Thanks a bunch,
Art