EGT and CHT wiring

[PeteP]

I am wondering if most are triming the EGT and CHT wiring harness or leaving them full length and stowing the extra. I have read several articles and they seem to be about euually divided on if one should shorten the wiring harnesses.

 

[RetiredRacer]

I cut mine to length.

160 hrs and they are still working fine.

 

[Rupester]

I cut mine to length, based on the GRT/EIS4000 instructions which recommended same. They work fine.

 

[N316RV]

Working on mine now - cutting to length

Dynon says it is fine to cut harness to length.

 

[Jeff R]

My radio shop cut them to length, which concerned me, but at ambient they all read within a degree of each other.