ECI FI hookup

[captn kirk]

I have a ECI Fi forward facing cold air sump vans snorkel looking for pics or advice on how to best connect the throttle and mix control thanks

 

[jcbarker]

throttle & mixture hookup

Here's some pix of my system. I have a Silver Hawk servo. I used a straight lever for the throttle and an offset lever for the mixture. Both are 1 3/4" CtoC. The bracket for the throttle is a custom one I made to hang from the bottom of the sump. The other brackets are from Van's FI kit.
Hope this helps,

JB

 

[sf3543]

ECI 360 FI

VAN's sells a kit specifically for this. It's pricey but works great.

 

[captn kirk]

Thanks for the info. I did contact ECI and they hooked me up with the test guys so i know the route of the cable and i need to make a few parts. Vans FI kit did not have any parts that i could use other than the rod ends