grayforge
Well Known Member
My ECI IOX-370 engine is here and hanging by the top 2 bolts on the mount so far. Sump is the ECI Cold Air Sump. Fuel injection is Precision Silverhawk.
A couple questions about engine components before my "Firewall Forward" book arrives.
1. What's the port pointed to by the leftmost arrow below? Is the one on the right Oil Pressure?
2. How about the port on the mechanical fuel pump in this photo? Fuel pressure? What do most do, plug it or add a sensor to a block on the firewall with hose from here?
3. What's this silver thing? Anything I need to do with it?
4. I think ECI ran-in my engine with a different Throttle Body since the outlet hose seems to be sized to an outlet on the bottom of the Throttle Body instead of the outlet on the top shown here. So I either need to shorten the hose or move the outlet to the bottom. What do most do?
5. Also, is this the proper orientation of the throttle body?
6. Will standard Vans throttle & mixture brackets work?
Thanks!
Russ
A couple questions about engine components before my "Firewall Forward" book arrives.
1. What's the port pointed to by the leftmost arrow below? Is the one on the right Oil Pressure?
2. How about the port on the mechanical fuel pump in this photo? Fuel pressure? What do most do, plug it or add a sensor to a block on the firewall with hose from here?
3. What's this silver thing? Anything I need to do with it?
4. I think ECI ran-in my engine with a different Throttle Body since the outlet hose seems to be sized to an outlet on the bottom of the Throttle Body instead of the outlet on the top shown here. So I either need to shorten the hose or move the outlet to the bottom. What do most do?
5. Also, is this the proper orientation of the throttle body?
6. Will standard Vans throttle & mixture brackets work?
Thanks!
Russ