Fly4Funn
Member
I am about to the point of cutting a panel and would like to get a few "opinions" from those of you flying behind the Dynon equipment. I have always planned to use the FlightDek 180 and have already purchased all of the sensors, wiring harnesses and options for that unit. I'm now thinking about instead of the D180, going with the D100 and a D120. Other than expense and panel room, what are your thoughts about the 2 different setups? My main concern with the D180 is the small screen displaying everything. With two screens, each set of information has it's own display area. It appears that the harnesses are the same for both. I also plane to add the HSI and AP modules. I know they are out there so you guys and gals flying behind them chime in and give me some information, good or bad to chew on. Backup steam gauges will be ALT, Airspeed, T&B, and of course a compass. No vacuum for gyros. Dumped the pump for inverted oil pickup! Radio stack will consist of a SL30, GTX327 and a 496.
I am NOT trying to start a debate about who has the better equipment so please don't go into this or that is better than Dynon. I am using Dynon, period. Just looking for opinions on which Dynon setup seems to be the best.
I am NOT trying to start a debate about who has the better equipment so please don't go into this or that is better than Dynon. I am using Dynon, period. Just looking for opinions on which Dynon setup seems to be the best.