WingsOnWheels
Well Known Member
I have been having nothing but problems with my EGTs so far. Is seems every flight a different cylinder goes wonky. It seems to happen more when the engine is hot. I have put new terminals on multiple times, i have replaced 1. The one I replaced worked for a couple flights, now it is all over the place again. I would think interference, but the chts are run in the same bundle and they are solid as a rock.
Is it possible I am burning these things out? I have them about 2in from the port. Im not happy with how my engine is running, but I dont think it is bad enough to cause these kinds of swings. The plane has all of 12 hrs on it at this point. I would like to use the egts to help diagnose a slightly rough engine, but I can't trust 2 out of 4 on any given flight.
Has anyone had a similar issue?
Is it possible I am burning these things out? I have them about 2in from the port. Im not happy with how my engine is running, but I dont think it is bad enough to cause these kinds of swings. The plane has all of 12 hrs on it at this point. I would like to use the egts to help diagnose a slightly rough engine, but I can't trust 2 out of 4 on any given flight.
Has anyone had a similar issue?