What have most builders used to control all the dust from cutting and sanding the canopy, other than the great outdoors. Getting kinda cold outside here, OK for the cutting but not feasible for sanding. I'm building a 2X4 construction, covered by plastic sheething and ordered a dust collection fan and filter contraption. Anyone come up with a good setup?
Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
Dust collection
- Thread starter Ron B.
- Start date
The unit I'm purchasing has three speeds and a 2,4,and 8 hr timer on it. I think that is a good idea as if after sanding you plan on calling it a day and leave, you can set the timer and clean the air so it will not all settle to the floor. Although some material will make it to the floor, I would think it will have to help.
