rjcthree
Well Known Member
I'm setting dry tappet clearances now, and have plenty of room to be anywhere in the specification range I choose. I'm trending toward setting them all to the lower end of the tolerance band (all between 0.028"-0.044"). Is there any technical preference to high/middle/low in the band?
Interestingly, all the exhausts were good with no spacers, all the intakes took a spacer or two. All the pushrods are the same pn, new lyc cylinders, first cut on the case. H2AD (I know, don't start).
Rick
Interestingly, all the exhausts were good with no spacers, all the intakes took a spacer or two. All the pushrods are the same pn, new lyc cylinders, first cut on the case. H2AD (I know, don't start).
Rick