majuro15
Well Known Member
I have both doors trimmed and mounted now with the handles installed. I'm about to drill the holes into the fuselage for the pins but want to make sure I'm doing it right. I'm somewhat disappointed in the door fit though. My doors sit a bit lower the the cabin top on the curves but are even on the top and just proud at the bottom. I'm working with some washer combinations on the mounts but that won't fix everything.
Do folks just glob on the filler and start sanding? I had no issues bonding the doors together, it's almost like the molds for my cabin top and doors aren't the same! The biggest difference is 3/16" in some spots.
I just ordered the Cee Bailey's windows, should I wait until I have those to just put in place from time to time to help get a smooth profile as I fill in the low spots on the doors?
I'll post a few pictures tonight.
Do folks just glob on the filler and start sanding? I had no issues bonding the doors together, it's almost like the molds for my cabin top and doors aren't the same! The biggest difference is 3/16" in some spots.
I just ordered the Cee Bailey's windows, should I wait until I have those to just put in place from time to time to help get a smooth profile as I fill in the low spots on the doors?
I'll post a few pictures tonight.