Building my trim tab it occurred to me I might be able to dimple the spar and hinge as opposed to countersinking the spar - it's kind of thin to countersink for dimples.
I tested dimpling a piece of scrap "P3" hinge and it seems to work well on the DRDT-2 with no distortion of the hinge material.
Interested in opinions on why this won't work / why countersinking the spar is preferred.
I tested dimpling a piece of scrap "P3" hinge and it seems to work well on the DRDT-2 with no distortion of the hinge material.
Interested in opinions on why this won't work / why countersinking the spar is preferred.