Pretty cool looking prop, but not that easy to install.
The clearance around the bolt heads seems marginal. My mechanic friend had a ground down crow foot, but even with that it was hard not to round the corners of the nuts. Less clearance than a Hartzell.
Lock wire was not easy either. WW specifies .032. We tried .040 and it would not fit around most of the nuts. On one bolt, due to the orientation even .032 wire would not go in the gap between bolt head and prop hub once it was twisted.
My friend filed a small groove in the corner of the bolt head between two flats and we got it done.
I'd be interested in feedback.
The clearance around the bolt heads seems marginal. My mechanic friend had a ground down crow foot, but even with that it was hard not to round the corners of the nuts. Less clearance than a Hartzell.
Lock wire was not easy either. WW specifies .032. We tried .040 and it would not fit around most of the nuts. On one bolt, due to the orientation even .032 wire would not go in the gap between bolt head and prop hub once it was twisted.
My friend filed a small groove in the corner of the bolt head between two flats and we got it done.
I'd be interested in feedback.