Aiki_Aviator
Well Known Member
I have just clecoed all of the VS stuff together and noted that there are some 'bumps' (i.e. read dents) being presented at the top and bottom of the VS on the leading edge relating to the forward ribs.
My question, is: Do I give the leading edge a slightly greater radius prior to getting to the ribs (i.e. Open the skin and broaden the radius) or do I trim/grind the ribs to a tighter radius.
I would need to do this prior to match drilling I guess. Thanks in advance.
My question, is: Do I give the leading edge a slightly greater radius prior to getting to the ribs (i.e. Open the skin and broaden the radius) or do I trim/grind the ribs to a tighter radius.
I would need to do this prior to match drilling I guess. Thanks in advance.