G
Geoff
My engine monitor came with an extra air temperature probe that was supposed to be threaded into the side of a carb. Since I have don't have a carb, I'm thinking of installing it somewhere else in the engine compartment. The manual even suggests using it as a "cowl air temperature" probe.
So... The question to those of you who have been operating for a while and/or might have a similar setup... Where under the cowl would be the most useful place for an air temperature probe? Inside the plenum (on the back baffle)? Outside the plenum (near the top of the firewall)? Somewhere else?
In operation, do you frequently say, "It sure would be useful to know how hot/cold it is in location XX."??
Thanks for any advice or thoughts.
-Geoff
RV-8 almost done
So... The question to those of you who have been operating for a while and/or might have a similar setup... Where under the cowl would be the most useful place for an air temperature probe? Inside the plenum (on the back baffle)? Outside the plenum (near the top of the firewall)? Somewhere else?
In operation, do you frequently say, "It sure would be useful to know how hot/cold it is in location XX."??
Thanks for any advice or thoughts.
-Geoff
RV-8 almost done