WingedFrog
Well Known Member
After trimming the end of the fiber arm of the canopy, I had the misfortune to have a different result on right and left side due to a slight difference in positioning of the trimming template. The right side shows a gap of about 1/8 of an inch through which you see the cavity that is behind the arm (see:http://4.bp.blogspot.com/-lVbvXqkvkLI/T6GO2PCf2WI/AAAAAAAAAvc/8Kuq4cRoHsk/s1600/right1.jpg . The left side covers the cavity completely without any gap (see:http://3.bp.blogspot.com/-t5xSUNn0bFo/T6GOXc3T2UI/AAAAAAAAAvM/uiJyg3phdoI/s1600/left1.jpg
I just visited a friend who built his -12 and his trimming shows the gap on both sides. I am curious to hear from the builders about this mystery.
Interestingly, there is no guidance in VAN's instructions on this matter (unless I missed it).![Confused :confused: :confused:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
More pictures are available on my builder's blog.
I just visited a friend who built his -12 and his trimming shows the gap on both sides. I am curious to hear from the builders about this mystery.
Interestingly, there is no guidance in VAN's instructions on this matter (unless I missed it).
More pictures are available on my builder's blog.