Future RV 9 Flyer
Active Member
Any reason Van's conduit can't be placed in the second hole back from the spars with a dab of rtv to hold it in place? Would save me from drilling all the ribs.
OK, then how about attached with these?
![]()
in the aviation aisle at Home Depot, have seen them at Lowe's also.
http://www.homedepot.com/p/SharkBit...pension-Clamp-23072A10/202032969#.UYSTdddDuuQ
Any reason Van's conduit can't be placed in the second hole back from the spars with a dab of rtv to hold it in place? Would save me from drilling all the ribs.
...Drilling the holes in the spars wasn't too hard (used a few 12" drill extensions). dragging the conduit through them was.![]()