Trying to figure out how to resolve an issue with my comm system that I think may be a setup problem. Basically the system is working fine (SL-30, PS 3000 intercom, Bose headset) but at high RPM settings the feedback of my own transmissions in my headset is extremely loud and has a lot of static type noise. Reception from others is fine with no problems and at lower power settings <2200 rpm the system is fine. I think it is due to the noisy environment in the RV and may even be a combination of the Bose ANR, the PS 3000 intercom and the SL-30 and I plan to try a different headset today (Zulu) to see if that changes things.
There are a number of parameters that can be set in the SL-30 and I wondered if one of these could be the answer.
Appreciate feedback from anyone with a similar setup
There are a number of parameters that can be set in the SL-30 and I wondered if one of these could be the answer.
Appreciate feedback from anyone with a similar setup