RV6_OKLA
Well Known Member
I am upgrading my RV6 panel from steam guages to glass and used Up North Aviation (VAF advertiser) to cut the new panel.
On 2/13/2013 I started communicating with Bill Morelli at Up North Aviation regarding cutting out my new instrument panel for my RV-6 panel upgrade. I sent Bill the layout for my panel and he looked it over, made a few modifications, and emailed me a file containing a full size image of the new panel. I took the file to Staples and had it printed out and checked the new dimensions. Perfect fit! I notified Bill that the design was ready to cut and sent him a panel blank. I received the panel on 2/28/2013 and it looks great! I highly recommend Up North Aviation and Bill is very easy to work with.
Here's the panel painted with instruments test fitted.
On 2/13/2013 I started communicating with Bill Morelli at Up North Aviation regarding cutting out my new instrument panel for my RV-6 panel upgrade. I sent Bill the layout for my panel and he looked it over, made a few modifications, and emailed me a file containing a full size image of the new panel. I took the file to Staples and had it printed out and checked the new dimensions. Perfect fit! I notified Bill that the design was ready to cut and sent him a panel blank. I received the panel on 2/28/2013 and it looks great! I highly recommend Up North Aviation and Bill is very easy to work with.
![RV-6JCalvert.jpg](/proxy.php?image=http%3A%2F%2Fi1053.photobucket.com%2Falbums%2Fs469%2FJerryCalvert%2FRV-6JCalvert.jpg&hash=a8ae1b5e39cf6f0dd038095d0392b363)
Here's the panel painted with instruments test fitted.
![CalvertRV6.jpg](/proxy.php?image=http%3A%2F%2Fi1053.photobucket.com%2Falbums%2Fs469%2FJerryCalvert%2FCalvertRV6.jpg&hash=52acaccdecd3769002b19f35003ecfad)
Last edited: