I am trying to use CherryMax CR3213-4, -2 & -4 rivets to secure the leading edge wing assembly to the spar of my RV-8 wing. Most of the rivets are not pulling all the way and are breaking well before fully seating.
Is this a problem with my basic rivet puller? I have ground down the tip of my puller to get it as straight as I can, but may have a very slight angle when pulling.
Any ideas on removing cherry max rivets?
SteveK
Is this a problem with my basic rivet puller? I have ground down the tip of my puller to get it as straight as I can, but may have a very slight angle when pulling.
Any ideas on removing cherry max rivets?
SteveK