RV7Guy
Well Known Member
Hey everyone,
Thanks in advance for the assist. Not too far out from riveting the front skin on my RV7 Slider. I've done everything possible to make it so I can use conventional rivets. However, a few, "tough to reach," areas will require blind rivets.
I'm having a heck of time deciphering the part numbers needed. Obviously they need to be flush rivets. Some will be 1/8" shank, others 3/32". The grip should be around 3/16".
For those who have already been there. What part numbers do I need?
Thanks!!!
Thanks in advance for the assist. Not too far out from riveting the front skin on my RV7 Slider. I've done everything possible to make it so I can use conventional rivets. However, a few, "tough to reach," areas will require blind rivets.
I'm having a heck of time deciphering the part numbers needed. Obviously they need to be flush rivets. Some will be 1/8" shank, others 3/32". The grip should be around 3/16".
For those who have already been there. What part numbers do I need?
Thanks!!!