Centre Section Hardware

[mike newall]

RV7, tip up QB from Czech.

In the 1993 bag there are some AN426-14 aluminium rivets.

We cannot see any callout for them at all, any suggestions ?

We also have noticed some bolts out of the spar - 6 #4 and 4 #3's. We presume these are to allow the QB to be either a 7 or 7A - there seem to be several instances of this in our fuselage. We have put the bolts in but hope we haven't missed anything ! The lower ones were hard to fit

Comments awaited.

 

[Captain_John]

Mike, the 14's are called out on DWG 11, in the Aft Center Section Blkhead Assembly Rear View diagram.

They hold the F-704G Vertical Bar in place.

It just so happens that DWG is on my wall and I am at the same ppoint in construction on the other side of the world, right now!

Hope this helps!

CJ

 

[mike newall]

John,

Thanks for that, just checked, already installed by the QB folks in Czech.

Anyone want some cheap AN426-14 rivets ?

The power of the internet indeed !