What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Center cowl support between exhaust pipes

J

Joe Giallo

I'm New Here
Anybody have pictures/comments of the U620A-D + U720A,B assembly on a IO-360 7A? I'm having a problem interpreting some of the plans notes relative to the differences in installation relative to engine type.

Thanks,

Joe
 
Mine were almost the same as Jeff's

But I found that the cowl fiberglass was not thick enough to warrent the use
of both shim plates, so I only used the thicker one.

Kent
 
Thanks alot for the pictures - they definitely help. Now I need to figure out why I don't have nearly the same vertical distance on the piece that fastens to the front gear leg support. For some reason I seem to have no vertical rise at all.....guess I'll stare at it some more.

Joe
 
I think the difference I mentioned may be due to Jeff having an O-360 installation with vertical induction and the shape of the bottom cowl is different with the air scoop. Does anyone have any insight/pictures of an IO-360 install with horizontal induction??

Thanks again,

Joe
 
You must log in or register to reply here.
Back
Top