mikegraycmg
Well Known Member
Does anyone know how to find out the flow rate of various carburetors?
Because of engine mount interference, I have to change the sump on my 0-360A1G6D (180 hp) from rear facing to vertical induction, and, consequently need to change the carburetor from the horizontal type to the vertical. My current carburetor is is an HA 6, part no. 10-5230. A vertical induction sump that will fit is part no. 78915, and Lycoming tells me that it will bolt up with my engine and a 10-3878 carb. I need to find out whether the 10-3878 carb will have an equivalent air flow to the existing 10-5230. Anybody know how to find out?
Because of engine mount interference, I have to change the sump on my 0-360A1G6D (180 hp) from rear facing to vertical induction, and, consequently need to change the carburetor from the horizontal type to the vertical. My current carburetor is is an HA 6, part no. 10-5230. A vertical induction sump that will fit is part no. 78915, and Lycoming tells me that it will bolt up with my engine and a 10-3878 carb. I need to find out whether the 10-3878 carb will have an equivalent air flow to the existing 10-5230. Anybody know how to find out?