apkp777
Well Known Member
Carb vent cover flange
Just noticed this on my carb. Bowl vent cover (thanks for the correction Brantel) is not flush with the mating surface. The fasteners came torqued. I am wondering if anyone else has a similar condition. This carb came from AERO and is an overhauled unit. The gap between the flange and the carb doesn't look right. There is a soft gasket which is pretty much useless. Perhaps this is normal?
[/IMG]
Just noticed this on my carb. Bowl vent cover (thanks for the correction Brantel) is not flush with the mating surface. The fasteners came torqued. I am wondering if anyone else has a similar condition. This carb came from AERO and is an overhauled unit. The gap between the flange and the carb doesn't look right. There is a soft gasket which is pretty much useless. Perhaps this is normal?
![2vajgo5.jpg](/proxy.php?image=http%3A%2F%2F%5BIMG%5Dhttp%3A%2F%2Fi41.tinypic.com%2F2vajgo5.jpg&hash=dbdae2a3111cf9ed248bf14e17a950a0)
Last edited: