Need some assistance on what to sand down more in order to get a batter cabin top fit. Here's where I'm at right now. Over all it seems to fit well except for.....Both sides have about the same 1/8th inch area visible on the flange but near the aft end it disappears.
Is this normal or what area should I sand to have this drop down more? I first thought it was the flange back area hitting the longeron but there's a gap right there. Thanks!
![IMG_2447.jpg](/proxy.php?image=https%3A%2F%2Fs32.postimg.org%2Fdl7lgg0r9%2FIMG_2447.jpg&hash=46e38e4254c21b8f64d51d710a751a51)
![IMG_2449.jpg](/proxy.php?image=https%3A%2F%2Fs32.postimg.org%2Fa45jdh1p1%2FIMG_2449.jpg&hash=9a934208b78acb7d85b5638b041fb9a1)
![IMG_2450.jpg](/proxy.php?image=https%3A%2F%2Fs32.postimg.org%2Fjd7pnlal1%2FIMG_2450.jpg&hash=79513628ff68d67bf0a5148e86a002c3)
![IMG_2448.jpg](/proxy.php?image=https%3A%2F%2Fs32.postimg.org%2Fasedwf0et%2FIMG_2448.jpg&hash=42a84b382441d0ebbdc838a8703b199a)
Is this normal or what area should I sand to have this drop down more? I first thought it was the flange back area hitting the longeron but there's a gap right there. Thanks!