Aero_Octaveus
Well Known Member
Has anyone had issues with the fitment of the Bulkhead Recess F-601K-1.
When I cleco mine onto the bulkhead, the top most #30 holes each side (and the one lower down #40 holes) do not want to align. The recess width seems to be 1/8" narrow overall. Is it possible that maybe Van's didn't get the bend 100% perfect on this one?
If I force the cleco's then the corners really "dog ear" up and there is considerable stress on those corners.
When I cleco mine onto the bulkhead, the top most #30 holes each side (and the one lower down #40 holes) do not want to align. The recess width seems to be 1/8" narrow overall. Is it possible that maybe Van's didn't get the bend 100% perfect on this one?
![IMG_0293.jpg](/proxy.php?image=https%3A%2F%2F1.bp.blogspot.com%2F-m1yOb_rvyF8%2FXBnbJkAL20I%2FAAAAAAAAErQ%2Fp3dW-34_Gf87qKSS3UG209lb3bO7uisVgCK4BGAYYCw%2Fs320%2FIMG_0293.jpg&hash=51ea9955c39602c5454e697c5424dcb1)
![IMG_0294.jpg](/proxy.php?image=https%3A%2F%2F1.bp.blogspot.com%2F-HZzxnuHqENQ%2FXBnbPplnhnI%2FAAAAAAAAErg%2FysU0vOy7VqIrzRM_jpHJzvlsyhdUcYNkQCK4BGAYYCw%2Fs320%2FIMG_0294.jpg&hash=a7a4d8c60d8c24f6a63847905e6d1d88)
If I force the cleco's then the corners really "dog ear" up and there is considerable stress on those corners.
![IMG_0292.jpg](/proxy.php?image=https%3A%2F%2F2.bp.blogspot.com%2F-tkKri4VukP4%2FXBnbRoPs__I%2FAAAAAAAAEro%2FeXSZKozB6zUHg7fehS1mgXHosASZ3m7zwCK4BGAYYCw%2Fs320%2FIMG_0292.jpg&hash=d42b24395bf19d330f2becd7a19a2f71)