Bonehead floor boards

[randyintejas]

Anyone flying with these? I am wondering about durability of the clear coat finish and what insulator did you use under it?

 

[Sam Buchanan]

Anyone flying with these? I am wondering about durability of the clear coat finish and what insulator did you use under it?

Link...photos....description.......anything??

 

[instructor_bill]

there you go

http://www.boneheadcomposites.com/

ta-daaaah

http://www.boneheadcomposites.com/m8/716--Aviation RV Floor Boards.html

for the floor boards

I want to know more about the wing tips. Those look different.

 

[Flyguytki]

I have them however have not flown yet. So far they seem to be pretty durable however I am not sure how long they would stay that good looking from your shoes. I am planning on covering them up with a piece of carpet. The center tunnel and quadrant are fantastic tho, probably the best add on I have done.

-david

 

[Greg Arehart]

I used super soundproofing (3/4" thick) from ACS:

http://www.aircraftspruce.com/menus/cs/sound.html

and I bent a couple of pieces of 0.040 Aluminum sheet to use as floorboards. They slide under the longerons on the sides and have a bent 3/4" flange that mates to the tunnel (the bend is down and there are a few holes in it to accommodate the screw heads for the tunnel screws - that tends to hold it in place on the tunnel side).

I put a couple of pieces of skateboard tread (very cheap at your local skateboard aircraft store) to keep from skidding my feet around on the aluminum.

Greg