Step on an 8
Yes, I installed a step on the left side of my -8, I used the standard-8A step and tried to follow the -8A instructions as best I could. I was a bit of a pain to install on a -8 that has been flying for seven years. I had to remove the floor under the rear seat and the floor for the forward part of the aft baggage compartment to get access to all the rivets. (I did this during a condition inspection, since some of that is removed anyway) But, I am very happy with the results, I think the length of the step is fine. There are no issues with ground (or flap) clearance.