While I was riveting the nose ribs in the horizontal stabilizer, my skins got a bend (or crease) in them that I could not get out once they were clecoed onto the rest of the HS skeleton. Of course it has to be on the top of the HS so I'm forever doomed to always be able to see it. My question is what can I do about them? Do I need new skins? Can it be covered down the road with filler during the painting phase? Is it OK to leave? The thought of having to redo the HS makes me sick at this point. I've went through more HS-0003 doublers and HS-702 spars than I can count trying to get edge distances to where I thought it was satisfactory. A link to a google photo album picture is below. This is the left side. It is the worst with the right side being slightly better. Thanks in advance for your words of wisdom.
https://photos.google.com/share/AF1...?key=dHJDaGM4dUh5OXBOVlRmdUFna25HT3RxbmpDa3Zn
https://photos.google.com/share/AF1...?key=dHJDaGM4dUh5OXBOVlRmdUFna25HT3RxbmpDa3Zn