I have trimmed my canopy to fit my frame and separated the windscreen and the rear of the canopy. I have also read all the threads on how to best make the canopy fit the frame, and still, It is approximately 1.25" out from the frame just ahead of the weldment. I will be gluing it on using 1/8" spacers as many of you have done. I am really hoping for a "crack free" canopy and just want opinions from those of you that have glued your canopy on and have had to pull the sides in and clamp it until the adhesive sets up.
Is 1.25" on each side (near the back.... where they all seem to crack) an excessive gap, or normal?
[/URL][/IMG]
Is 1.25" on each side (near the back.... where they all seem to crack) an excessive gap, or normal?