Hi all, hope everyone is having a good weekend. I'm an RV-8 newbie and just getting started on the Empenage Kit after fooling around for almost a year getting the shop set up and all the tools & equipment ready. This is my first post.
It's the simple things that trip me up, and I came to "all stop" last night when I could not decide on which direction to install and squeeze the rivets for the Horiz.Stab Rear Spar & Stiffeners (HS-603 and 609PP). Does the shop head go on the thinner "spar side", or on the much thicker "stiffener side"?
Thanks!
John Munroe
Woodstock, VA
http://www.mykitlog.com/jmunroe
It's the simple things that trip me up, and I came to "all stop" last night when I could not decide on which direction to install and squeeze the rivets for the Horiz.Stab Rear Spar & Stiffeners (HS-603 and 609PP). Does the shop head go on the thinner "spar side", or on the much thicker "stiffener side"?
Thanks!
John Munroe
Woodstock, VA
http://www.mykitlog.com/jmunroe
![ipw5k9.jpg](/proxy.php?image=http%3A%2F%2Fi47.tinypic.com%2Fipw5k9.jpg&hash=2f05f10841a6c6cebc470e6aae38e4f7)