Hi everyone. Just (finally) bought a band saw and I'm looking for recommendations on a blade that would work better cutting aluminum that the one it came with which works but is a bit course (don't know the actual tooth count) and leaves a jagged edge.
My saw takes a 72 inch blade of between 1/8 and 1/2 inch width. On slow speed it runs 16 feet/min.
Any suggestions?
thanks,
Ivan
My saw takes a 72 inch blade of between 1/8 and 1/2 inch width. On slow speed it runs 16 feet/min.
Any suggestions?
thanks,
Ivan