baffling

[hsdexo]

Where can you buy the baffles that go under the bottom between the cylinders for the lycoming engine. My 540 does not have them and I need .
a set of six. The cylinder head temp is ok now in Feb and Mar but I can see the cyl's getting too hot this summer.

Thanks Harry

 

[az_gila]

What model?

Where can you buy the baffles that go under the bottom between the cylinders for the lycoming engine. My 540 does not have them and I need .
a set of six. The cylinder head temp is ok now in Feb and Mar but I can see the cyl's getting too hot this summer.

Thanks Harry

This covers a lot of them, but if you give us the 540 model number I'll check.

http://www.aeroinstock.com/products/NzUzMzg=/6062/41370/product_detail/index.html

gil A

 

[Mark Burns]

Double check your count

Harry,
You should only need four.

I found a couple on Ebay for my 0-360.

Mark

 

[hsdexo]

This covers a lot of them, but if you give us the 540 model number I'll check.

http://www.aeroinstock.com/products/NzUzMzg=/6062/41370/product_detail/index.html

gil A

Gil, it is an 0540 E4C5

 

[hsdexo]

Harry,
You should only need four.

I found a couple on Ebay for my 0-360.

Mark

Thanks Mark you are correct I only need four.

 

[az_gila]

Some numbers

Gil, it is an 0540 E4C5

My old parts manual shows the following for an "E" model

4 pcs 74718 Baffle assembly

4 pcs 72834 Cover, Baffle Ignition hole (held on by 2 pcs. 10-32 screws for each cover)

4 pcs 71611 Retainer

4 pcs 71610 Hook

It looks like they are all current part numbers... the cover plate looks just like a flat plate... you could make that yourself.

http://www.aeroinstock.com/products/NzQ3MTg=/6062/41385/product_detail/index.html

http://www.aeroinstock.com/products/NzI4MzQ=/6062/41328/product_detail/index.html

http://www.aeroinstock.com/products/RETAINER%2CINTCYL-COOLN-BAF/6062/5567/product_detail/index.html

http://www.aeroinstock.com/products/HOOK-%28360%2F320%29/5598/48054/product_detail/index.html

Try calling some of your local engine re-builders, these parts look like the ones they would throw away when they scrap or major overhaul an engine.

...hope this helps... gil A

 

[hsdexo]

Baffling

My old parts manual shows the following for an "E" model

4 pcs 74718 Baffle assembly

4 pcs 72834 Cover, Baffle Ignition hole (held on by 2 pcs. 10-32 screws for each cover)

4 pcs 71611 Retainer

4 pcs 71610 Hook

It looks like they are all current part numbers... the cover plate looks just like a flat plate... you could make that yourself.

http://www.aeroinstock.com/products/NzQ3MTg=/6062/41385/product_detail/index.html

http://www.aeroinstock.com/products/NzI4MzQ=/6062/41328/product_detail/index.html

http://www.aeroinstock.com/products/RETAINER%2CINTCYL-COOLN-BAF/6062/5567/product_detail/index.html

http://www.aeroinstock.com/products/HOOK-%28360%2F320%29/5598/48054/product_detail/index.html

Try calling some of your local engine re-builders, these parts look like the ones they would throw away when they scrap or major overhaul an engine.

...hope this helps... gil A

Thanks Gil