Anyone use the RV-12 switch & fuse panels?

[jimbo]

I like the way the RV12 has the fuse's coming thru the panel in a one mount plate. Also the same with the rocker switch plate. I haven't seen it up close, just in the Vans web site pictures. Not even sure even what part numbers they are as they are not in the Vans printed catalog.

I was wondering if anyone has used these on their RV7 or 9 and if so how they like it and work for them?

I like the rocker switches over the toggle switches but dread having to cut out rectangular holes.

Jim

 

[Fearless]

I called Van's and asked about this late last year after I saw the panel at OSH 09. Bottom line is they won't sell you the panel if your not building a 12 model.

 

[jimbo]

Thanks for the reply Mike. That makes it a nonstarter then.

Jim
RV9A
pondering the wiring-gotta takes some steps

 

[RetiredRacer]

I got the same result from Van's.

 

[johnbright]

http://www.delcity.net/store/8!way-...a_1.r_IF1003?gclid=CJaf4Jmbma0CFYvDKgodnx5hkw

 

[johnbright]

Individual Littelfuse panel mount 01550430ZXU w/30 A crimp terminals, 01550420ZXU w/20 A crimp terminals, 01550300Z w/20A pigtails, 01550400Z w/30A pigtails. Presume wire insulation not aircraft ype. http://www.littelfuse.com/data/en/Data_Sheets/155ATOPanel.pdf