Thunderpig
Member
I have a PM I sent to the gent that I think works for Dynon, but wanted to ask the group. I'm just getting to the point of riveting up the tailcone and I'm concerned about closing it up too soon in case I need to put an antennae on the bottom of skin between the F-1010 and F-1011 bulkheads. From what I have read in here, ILS/LOC ant typically go into the wing tips, the GPS on top, VHFs under the seat pan. I'm planning on getting the uAvionics tailBeacon, so that should take care of xpndr and ADS-B. What am I missing?
I would like to run lines/build up mounting plates ahead of time because, quite frankly, crawling into the tail section is going to be a bit rough for a guy my size.
After a 6 month layoff with busy work schedule and trim tab frustration, I have a had a solid month of progress and wanting to keep it up...
I would like to run lines/build up mounting plates ahead of time because, quite frankly, crawling into the tail section is going to be a bit rough for a guy my size.
After a 6 month layoff with busy work schedule and trim tab frustration, I have a had a solid month of progress and wanting to keep it up...