Kahuna
Moderatoring
I have managed to break off the fitting for the standard pickup location. I have cleaned the hole and retapped. But frankly the NPT fitting will have to go much deeper into the hole than Id like given the 45 degree angle fitting getting near the case when seated.
So without getting too far into the weeds with the how I got here..... Id preferr to cap that hole and pickup another location. Is there one?
I have a remote airwolf and that would be easy cheesy to get a sensor to, but they say that the pump pressure is not a good place. What is a good place? Vac pad? That plate would be easy too as I have the inverted oil plate there.
IO-540 c4b5.
So without getting too far into the weeds with the how I got here..... Id preferr to cap that hole and pickup another location. Is there one?
I have a remote airwolf and that would be easy cheesy to get a sensor to, but they say that the pump pressure is not a good place. What is a good place? Vac pad? That plate would be easy too as I have the inverted oil plate there.
IO-540 c4b5.