Dbro172
Well Known Member
Similar to recent posting; I wasn't too keen on Vans method of coiling the alternate air door pushrod cable around the screw, nor did I have a tiny little blow torch to heat the cable to do so. If you you haven't gotten to this step you probably won't fully comprehend this little conundrum! But I think this whole little filtered air box as a whole, is more of a challenge than the sliding canopy...
So hear is what I came up with and a short video showing it in action. The control is in my cockpit, near the carb heat, but sort of recessed under the bottom flange of the panel.
Video:
http://www.youtube.com/watch?v=YhsEx4_Z9v0
So hear is what I came up with and a short video showing it in action. The control is in my cockpit, near the carb heat, but sort of recessed under the bottom flange of the panel.
Video:
http://www.youtube.com/watch?v=YhsEx4_Z9v0
Last edited: