Smilin' Jack
Well Known Member
I have started the HS SB and so far all is progressing well, any luck we'll prime the new pieces today and get the new holes all located.
So far i have been able to snap off all but one skin rivet and then punching them out with the spring loaded center punch method even has worked on all the AN 470-4 rivets.
I'll post some pictures when I get this done. About 12 hours so far.
Jack
So far i have been able to snap off all but one skin rivet and then punching them out with the spring loaded center punch method even has worked on all the AN 470-4 rivets.
I'll post some pictures when I get this done. About 12 hours so far.
Jack