Hi All, was working on installing the Almost a 14 mod in my 7A slider. I am running into an issue where the screws on the vertical and angled center sections (flap motor cover) are not lining up with the new center piece from Anti-splat.
Has anyone ever seen this? I reached out to Allan via text and will email him photos but wanted to see if I am just missing something that others have seen. Everything else seems to line up correctly but the nut plates and holes are off by about 1/4" or so.
Just to be sure I tried my side covers in a 9A sitting next to me in the hangar and they line up perfectly.
Has anyone ever seen this? I reached out to Allan via text and will email him photos but wanted to see if I am just missing something that others have seen. Everything else seems to line up correctly but the nut plates and holes are off by about 1/4" or so.
Just to be sure I tried my side covers in a 9A sitting next to me in the hangar and they line up perfectly.
![80-img_20190320_151330_66f9f310014bbd18d5a9e6323de835aa8c23b85e.jpg](/proxy.php?image=https%3A%2F%2Fcimg6.ibsrv.net%2Fgimg%2Fwww.audiworld.com-vbulletin%2F475x633%2F80-img_20190320_151330_66f9f310014bbd18d5a9e6323de835aa8c23b85e.jpg&hash=f18d71f4df27f588729fc19414160ae3)
![80-img_20190320_151336_ab9d4b976c66e226a843d499dc576e8e98279a7f.jpg](/proxy.php?image=https%3A%2F%2Fcimg7.ibsrv.net%2Fgimg%2Fwww.audiworld.com-vbulletin%2F475x633%2F80-img_20190320_151336_ab9d4b976c66e226a843d499dc576e8e98279a7f.jpg&hash=d004ba95f1ae18a23ccc726bae3d3c4e)
![80-img_20190320_151358_57a870c216836712f3156cc4a6db37a71687c0fd.jpg](/proxy.php?image=https%3A%2F%2Fcimg8.ibsrv.net%2Fgimg%2Fwww.audiworld.com-vbulletin%2F475x633%2F80-img_20190320_151358_57a870c216836712f3156cc4a6db37a71687c0fd.jpg&hash=b342d1836fef67e64f17141f29aaed8b)
Last edited: