Aft spar/rib holes not lining up

[miyu1975]

Ok..I have double and triple checked that I have the right spars and ribs and orientation. All the holes on forward are fine...but the aft spar only the inner most ribs two inside holes are clearly drilled in different spots. Again, I looked over the directions and plans to make sure I had the right ribs there.. any ideas..

see pics

http://picasaweb.google.com/lh/photo/szpxqgk_ABO9DYr5UBQZ3Q?feat=directlink

 

[miyu1975]

ok...I re read the instrx and it says on those wing walk ribs to drill in those holes..thx