Don
Well Known Member
I am just starting on the FWF part of my RV-9A build. I will be using an RV-200 prop and the Jihostroj P-920-028 Governor (the engine is an IO-340). It's time to drill the holes in the firewall and Drawing 19 has a note for one hole on the upper left part of the firewall that says, "Prop control cable (Aft mounted governor) drill 5/8 dia. Hole".
Before I drill the hole I'd like to verify that the Jihostroj governor is aft mounted and that the hole location shown will work.
Thanks!
Before I drill the hole I'd like to verify that the Jihostroj governor is aft mounted and that the hole location shown will work.
Thanks!