mattasmith12
Active Member
Hello all,
Hoping for some help as I assemble the aft deck on the RV6. I've been watching the extremely helpful assembly videos by George Orndorff. He details the aluminum angle spacers that need to be made prior to drilling the 614 aft deck. He mentions that the 3/4 X 3/4 angle that attaches to the 611 bulkhead requires a few notches. I can't figure out where those go.
I can't tell from the drawings either. Should the 3/4 X 3/4 angle be notched so that it sits flush with the top of the longerons? Or should it fit below the longerons with the extra 1/8" being taken up by the 611E spacer?
I'd really appreciate a course correction or maybe a picture!
Hoping for some help as I assemble the aft deck on the RV6. I've been watching the extremely helpful assembly videos by George Orndorff. He details the aluminum angle spacers that need to be made prior to drilling the 614 aft deck. He mentions that the 3/4 X 3/4 angle that attaches to the 611 bulkhead requires a few notches. I can't figure out where those go.
I can't tell from the drawings either. Should the 3/4 X 3/4 angle be notched so that it sits flush with the top of the longerons? Or should it fit below the longerons with the extra 1/8" being taken up by the 611E spacer?
I'd really appreciate a course correction or maybe a picture!