Pat Stewart
Well Known Member
Today I started my engine for the first time, started on the third blade and ran very smoothly. The idle was set a little low but that's easy to fix.
I allowed the Garman 430 to acquire satellites and sure enough my MFD showed the correct location and MAP. The PFD however would not bring up a MAP page at all. The Ethernet box is powered up and working so I don't think that's the problem. I also cannot seem to get the ARINC software
to load.
Any ideas from those who have already mastered this system.
Pat
I allowed the Garman 430 to acquire satellites and sure enough my MFD showed the correct location and MAP. The PFD however would not bring up a MAP page at all. The Ethernet box is powered up and working so I don't think that's the problem. I also cannot seem to get the ARINC software
to load.
Any ideas from those who have already mastered this system.
Pat