Hi,
I am helping a friend with his RV-12 with the Dynon SkyView system installed along with the Van's "magic box" Following some comm antenna work, the ADS-B OUT is now no longer working. ADS-B in is still working.
Going to the Skyview configuration page, it shows the '470' ADS-B module is alive and working. The Skyview is getting a good GPS signal and accurate position.
I don't understand where or what things I should be looking for to troubleshoot. I've visually inspected all the wires and everything looks ok.
So, my questions...
What device generates the ADS-B out signal?
Is it the 470 ADS-B box or the transponder box?
Does the ADS-B out use the same GPS position data as the Skyview?
Are there any screens on the Skyview that may help narrow down the problem?
Where else should I be looking?
So, my question is where to look?
Thanks
Mark Klepper
N1075
I am helping a friend with his RV-12 with the Dynon SkyView system installed along with the Van's "magic box" Following some comm antenna work, the ADS-B OUT is now no longer working. ADS-B in is still working.
Going to the Skyview configuration page, it shows the '470' ADS-B module is alive and working. The Skyview is getting a good GPS signal and accurate position.
I don't understand where or what things I should be looking for to troubleshoot. I've visually inspected all the wires and everything looks ok.
So, my questions...
What device generates the ADS-B out signal?
Is it the 470 ADS-B box or the transponder box?
Does the ADS-B out use the same GPS position data as the Skyview?
Are there any screens on the Skyview that may help narrow down the problem?
Where else should I be looking?
So, my question is where to look?
Thanks
Mark Klepper
N1075