vlittle
Well Known Member
Here is a preview of the beaconX controller that we developed based on the open-source huVVer-AVI devices. I have moved this from another thread, in order to focus on this one application.
Status: The software/hardware combination is ready for flight testing. Lab testing has been successful— the photo below shows the XP status returned from a tailBeaconX transponder after Altitude and Mode info was sent by the controller.
The test bird uses a Dynon D10A, but most common serial altitude streams can be used.
The huVVer-AVI is available in both a 2” and a 3” version to fit (or retrofit) easily. I will provide the software load directly. Right now, only for Beta trials, but a full release will come later.
Vern
![0AE87C45-1CDA-4D13-BABC-46B2B3620493.jpg 0AE87C45-1CDA-4D13-BABC-46B2B3620493.jpg](https://vansairforce.net/data/attachments/15/15765-a439667da46a1034c56b2253b1b7b826.jpg)
Status: The software/hardware combination is ready for flight testing. Lab testing has been successful— the photo below shows the XP status returned from a tailBeaconX transponder after Altitude and Mode info was sent by the controller.
The test bird uses a Dynon D10A, but most common serial altitude streams can be used.
The huVVer-AVI is available in both a 2” and a 3” version to fit (or retrofit) easily. I will provide the software load directly. Right now, only for Beta trials, but a full release will come later.
Vern
![0AE87C45-1CDA-4D13-BABC-46B2B3620493.jpg 0AE87C45-1CDA-4D13-BABC-46B2B3620493.jpg](https://vansairforce.net/data/attachments/15/15765-a439667da46a1034c56b2253b1b7b826.jpg)