mikemalone
Active Member
I was advised and subsequently purchased the following non-magnetic items to attach the Dynon ADHARS through 3/16" holes:
MS35214-55 Panhead Screw
MS21044D3 Alloy Nylock Stiffnut
NAS1149B0332H Washer
The nut is very, very tight. Can't imagine wanting to remove these when it comes to, perhaps, having to level the ADHARS with shims/washers anytime in the future. Is there a better combination to achieve the same result? Thanks in advance.
MS35214-55 Panhead Screw
MS21044D3 Alloy Nylock Stiffnut
NAS1149B0332H Washer
The nut is very, very tight. Can't imagine wanting to remove these when it comes to, perhaps, having to level the ADHARS with shims/washers anytime in the future. Is there a better combination to achieve the same result? Thanks in advance.