Pat Stewart
Well Known Member
After my first engine start I had a few issue.
First the Skyview flight display was upside down. This was easily corrected by correcting the ADHARS unit which was mounted upside down. Second the Garmin 200 radio does not transmit or receive. When I key the mic I get the TX on the radio but that's it. Also no side tone in the headset. Third the Skyview does not find the Autopilot Servos in the software setup process. Looks like I will be chasing a few wiring issues.
The Rotax did have high Fuel pressure however the feedback I received on the forum says it's probably the sending unit. I plan On installing an in line gauge and see exactly what it is before looking any deeper.
First the Skyview flight display was upside down. This was easily corrected by correcting the ADHARS unit which was mounted upside down. Second the Garmin 200 radio does not transmit or receive. When I key the mic I get the TX on the radio but that's it. Also no side tone in the headset. Third the Skyview does not find the Autopilot Servos in the software setup process. Looks like I will be chasing a few wiring issues.
The Rotax did have high Fuel pressure however the feedback I received on the forum says it's probably the sending unit. I plan On installing an in line gauge and see exactly what it is before looking any deeper.
Last edited: