Or better yet a tungsten but same shape.
Or better yet a tungsten but same shape.
Bucking bar...Titanium rectangular one with the angled face on one end.
Since you said the project you are considering is 95% 1/8 rivets, my recommendation would be for at least a 3X.
My preference is a 2X for 3/32 rivets put you will have so few it probably wouldn't matter.
The bucking bar that is my favorite is no longer available so I can't recommend anything, but for 1/8 rivets stick with bars on the heavier side.
Thinking about building a T18?