Gagarin737
Well Known Member
Page 11-06 step 8;
Another question from an newby;
In this step you have to install a bushing. The note above states to deburr only enough to locate the bushing. I also read a tip about using a c-clamp and a socket to get the bushing in.
Do I have to use a round file to enlarge the hole? Or does somebody have some tips for installing the bushings?
Thanks, Joeri.
Another question from an newby;
In this step you have to install a bushing. The note above states to deburr only enough to locate the bushing. I also read a tip about using a c-clamp and a socket to get the bushing in.
Do I have to use a round file to enlarge the hole? Or does somebody have some tips for installing the bushings?
Thanks, Joeri.